• Categories:Industry News
• Author:
• Origin:
• Time of issue:2020-12-10
• Views:0

(Summary description)The manufacturer of the permanent magnet lifter tells you that if you want to use the lifting belt for a longer time, you must first choose a regular manufacturer. In the basic principles and methods of lifting operations, you should first consider choosing a suitable spreader. In recent years, the spreader industry in my country has developed rapidly, but the technical standards are not perfect and there is a lack of mandatory standards. Some domestic enterprises produce arbitrarily, even lower the safety factor, some cases of contract processing and non-standard production. The actual quality of the sling is uneven, and there are certain safety risks. Therefore, it is necessary to choose a formal manufacturer and establish a corresponding management system.







Before moving before factory inspection, the purchased sling must be produced and inspected by a professional manufacturer, and has a certificate and maintenance manual. The rated lifting weight, production number, production date and manufacturer of the product must be in obvious places that are not easy to wear. Name and other signs. The permanent magnet jack manufacturer tells you that if conditions permit, you can go to the supplier’s production plant for quality supervision.



Add a load-bearing test. For bulk purchases, you can extract them for professional measurement to effectively check whether the rated load meets the requirements. The permanent magnet jack manufacturer tells you that if necessary, you can cut the sheath to check whether the number of core joints exceeds the standard and whether the material is qualified.







Add a load-bearing test. For bulk purchases, you can extract them for professional measurement to effectively check whether the rated load meets the requirements. The permanent magnet jack manufacturer tells you that if necessary, you can cut the sheath to check whether the number of core joints exceeds the standard and whether the material is qualified.



Strict inspection before use. In the daily inspection of certain units, it is not enough to damage the outer sheath and inner core of the lifting belt. Many units neglect the elasticity check of the flexible sling. The manufacturer of the permanent magnet jack tells you that the circumference should be re-measured according to the standard and compared with the standard circumference. Employees should be informed of the standard length of each sling and how much it cannot be stretched to determine whether it meets the flexibility requirements.